Operation
7
w ww.b is se ll .c om 8 00 .2 37 .7 69 1
Getting ready continued
2. Fill the water tank
A. Remove tank by lifting straight up and away
from unit.
B. Unscrew cap at bottom of water tank and
remove the insert assembly.
C. Fill water tank with water. For best results,
water should be at room temperature.
D. Replace insert assembly and cap, tighten
until snug.
E. Replace water tank by lining up vertical
guides and gently sliding tank into place.
3. Twist the quick release cord wrap clockwise to
unwrap the power cord completely and plug into
a 120-Volt grounded outlet as described on the
Important Safety Instructions, page 3.
4. The ready light will illuminate when the Steam Mop
Deluxe is ready for use.
Before you clean
Thoroughly sweep or vacuum floor prior to cleaning
with the Steam Mop Deluxe.
Cleaning hard floors
Your Steam Mop Deluxe is designed to clean hard floor-
ing such as ceramic tile, vinyl, laminate, marble, stone
and sealed hard wood floors. Use of your Steam Mop
Deluxe on waxed or some unwaxed floors may result in a
diminished glossiness. The Steam Mop Deluxe is not for
use on unsealed wood floors. For best results test in an
inconspicuous area or check the care instructions from
your flooring manufacturer.
Cleaning hard floors
Your Steam Mop Deluxe is designed to clean hard floor-
ing such as ceramic tile, vinyl, laminate, marble, stone
and sealed hard wood floors. Use of your Steam Mop
Deluxe on waxed or some unwaxed floors may result in a
diminished glossiness. The Steam Mop Deluxe is not for
use on unsealed wood floors. For best results test in an
inconspicuous area or check the care instructions from
your flooring manufacturer.
1A 1B
2A 2B
2E