Filter
Top Products
6:00
This product is for household use only.
1. Remove all packing material, and any stickers from the product.
2. Remove and save literature.
3. Wash all removable parts as instructed in the Care and Cleaning section.
4. Open water reservoir/brew basket cover and pour in
fresh cold water up to the #12-cup level mark.
5. Place the filter into the brew basket with the handle to
the right.
6. Close water reservoir/brew basket cover securely.
7. To replace brew-thru lid cover on empty carafe insert
small hole on left side of cover handle into projection
on carafe cover holder. Press U-shaped projection on
right side of cover handle down to click into position on
right side of cover holder .
8. Place empty carafe on the “Keep Hot” plate.
9. Pull power cord out from power cord holder in back of coffeemaker and plug
into standard electrical outlet.
10. Brew water through appliance following the BREWING COFFEE instructions
without adding coffee grounds. This removes any dust or residue that may
have remained in the coffeemaker during the manufacturing process.
11. When brewing is complete, discard the water from the carafe.
12. Turn off the coffeemaker; unplug it and allow it to cool down.
• You can adjust the length of the power cord to suit your needs.
• To increase the length of the power cord, simply grasp the cord (not the plug) in
the rear of the coffeemaker and gently pull down and out of the slot away.
• To decrease the length of the power cord, simply feed any excess cord into the
slot in the rear of the coffeemaker.
• Lift the cord and lock it into the slot when cord is at desired length.
1. Plug appliance into standard electrical outlet.
2. The digital clock display flashes 12:00 .
You must set the clock in order to use the Delayed
Brewing feature.
MA
X
12:00