Filter
Top Products
The Assembly can be washed by hand in hot, sudsy water,
rinsed and dried thoroughly. After each cleaning, add a
few drops of cooking or mineral oil to the Cutter Blade.
3. Before replacing the Pierce Lever Assembly, wipe the Can
Opener body, and area around the drive wheel with a slightly
damp cloth. A mild cleaner can be used to remove stubborn
spots. Be sure to dry the unit thoroughly before next use.
4. To replace the Pierce Lever
Assembly, insert the Pivot Pin
on the back of the Lever into the
keyhole shaped opening on the
Can Opener Housing. Then slide
the Pierce Lever Assembly to
the left until the pin is securely
in place.(Figure F)
5. Knife Sharpening slots (mod-
els EC43 and EC43B) and surrounding area should be wiped
with a damp cloth after each use.
Service, if necessary, must be performed by a
Black & Decker (U.S.) Inc., Household
Appliance Company-Owned or Authorized
Service Center. The Service Center nearest
you can be found in the yellow pages of your
phone book under “Appliances-Small-
Repairing”.
For your convenience, a complete listing of
Company-Owned Service Centers can be
found on pages 9-11.
If mailing or shipping your Can Opener, pack it
carefully in a sturdy carton with enough pack-
ing material to prevent damage. Include a
note describing the problem to our Service
Figure F
8
Need Help?
Pivot Pin
Keyhole
Slot
SERVICE
OR REPAIR