Filter
Top Products
6
ENGLISH
Use
Adding oil
• Raise the basket handle (7) until it locks in
the horizontal position.
• Press the lid release button (2) & allow the
lid to open.
• Lift the basket (10) from the Fryer.
• Remove the cooking bowl (9).
• Check the element for signs of damage or
debris to prolong the life of the appliance &
improve efficiency.
Note: The bowl should only be removed while
the product is cool.
• Place the cooking bowl back in the appliance
making sure it is seated correctly.
Note: If the cooking bowl is not seated correctly
the fryer will not function.
• Pour good quality cooking oil into the
cooking bowl. Always make sure the oil level
is between the maximum & minimum marks
on the cooking bowl. (Approx 1.65 liters)
Note: Cook only in the bowl supplied.
• Fit the basket into the appliance. Close the
lid & press handle release button to lower
the handle to the vertical position.
Cooking
• Connect the appliance to a suitable electrical
supply.
• Rotate the temperature control (3) to the
required setting, the temperature indicator
lamp (4) will light up to indicate the appliance
is on and the oil is being heated.
• The temperature indicator lamp (4) will go out
the oil is at the selected temperature.
• Preheating the empty basket in this way will
help prevent food sticking to it.
• Raise the handle (7) to the carrying position.
• Press the lid release button (2) & allow the lid
to open.
• Remove the basket & close the lid. Place the
basket on a worktop, using clean cloth or
paper towels to prevent marking the work
surface.
• Place the prepared ingredients in the basket
(10), then open the Fryer lid & fit the basket
to the appliance, slowly lowering into the oil.
Note: Excess moisture should be removed from
ingredients with a clean cloth or paper towels
before frying.
Note: Do not over fill the basket.
• Carefully close the lid, making sure it latches
in position.
• While holding the handle, press the handle
button (8). Slowly lower the handle to the
vertical position.
Note: The temperature indicator lamp (4) will
cycle on and off during cooking. Keep lid (1)
closed during cooking.
• Set the timer by pressing the timer set button
(6) until the required number of minutes is
reached. (The timer increases in increments
of 1 minute up to a maximum of 30 minutes)
When the timer has finished a series of
beeps will be heard, The beeping will be
repeated after 1 minute and can be cancelled
by pressing the timer set button (6).