Filter
Top Products
After use
• Remove the plug from the socket and let
the appliance cool down before leaving
it unattended and before changing,
cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should
be stored in a dry place. Children should
not have access to stored appliances.
Inspection and repairs
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts and any other
conditions that may affect its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply
cord for signs of damage, ageing and
wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged
or defective.
• If the power supply cord or mains plug
is damaged or defective it must be
repaired by an authorised repair agent in
order to avoid a hazard. Do not cut the
power supply cord and do not attempt
to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
This product must be earthed.
Always check that the power supply
corresponds to the voltage on the rating
plate.
If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black & Decker Service Centre
in order to avoid a hazard.
Extension cables & Class l product
A 3-core cable must be used as your
appliance is earthed and of Class l
construction.
Up to 30m (100 ft) can be used without loss
of power.
To avoid the risk of electric shock,
do not immerse the cord, plug or
appliance in water or other liquid.
Overview
This appliance includes some or all of the
following features.
1 On / Off switch
2 Lid
3 Spout
4 Maximum fill mark
5 Power on indicator
6 Kettle base
7 Handle
8 Lid release button
Before first use
• Remove all packaging from the
appliance,
• Clean the appliance before first use.
• Fill the kettle with cold water to the
maximum fill mark (4). Do not over fill.
• Close the lid (2). Boil the water as
described below.
• Discard the boiled water and repeat the
procedure.
Use
Warning! Always place the appliance on a
flat, clean and non-slip surface before
operating it.
Warning! Always allow the product and
contents to cool before opening the lid /
re-filling.
Warning! Always check the water level
while using the appliance. Never use the
appliance without sufficient water.
English
-5-