Filter
Top Products
This appliance is for household use only.
1. Place the pulp separator on the base with the juice spout facing
you .
2. Insert the cutter/stainer in the center of the pulp separator. Turn it
left and right a few times until it fits into place .
3. Grip the pulp container and slide it in until it snaps into place
.
1. To unlock the locking latches, pull open at the bottom of each
latch to disengage from the groove on the cover .
2. To remove the cover, take out the feeder and food tray; grasp
the chute and pull up the cover .
3. To remove the pulp separator, grip the juice spout with one hand
and the back edge of the pulp separator with the other hand.
Pull it up with the cutter/strainer in place .
4. To remove the cutter/strainer, hold the juice spout with one
hand and grasp the cutter/strainer rim with the other hand;
pull it out .
5. To remove the pulp container, grasp the sides firmly and slide it out.
HI
OFF
LOW
HI
OFF
LOW