Filter
Top Products
■ Do not install the Toaster directly in front of an
electrical outlet, but be sure it is mounted within
reach of an electrical outlet.
■ The Toaster is designed to be mounted directly
next to any other Spacemaker* Optima
TM
product,
with a clearance of at least 1” between the two
products. If it is not mounted next to any other
Spacemaker* Optima
TM
product, maintain at least
a 5” clearance on all sides including the back.
NOTE: If you have Flush Bottom cabinets—a flat
level surface where the cabinet doors come to the
bottom of the cabinet front—(See Illustration 1A
page 6) please take note that the Metal Lip of the
Toaster should not be placed anywhere under the
hinge area of two cabinet doors.
If you are mounting the Horizontal Toaster directly
next to another Spacemaker* Optima
TM
product
that is already mounted:
1. Place the Mounting Template along the side of
the already-mounted Spacemaker* Optima
TM
pro-
duct that your Horizontal Toaster will hang next to.
2. Using the Mounting Template edge as a guide,
draw a line on the underside of the cabinet.
(Figure A) This will be the line to use to mark the
edge of the Horizontal Toaster’s location.
NOTE: To help determine
mounting location, see page 24
for the lengths of all the
Spacemaker* Optima
TM
products.
Figure A
*Trademark of General Electric Company, U.S.A.
5