Black & Decker TR200JA Hot Beverage Maker User Manual


 
Close the lid (1). Boil the water as described
below.
Discard the boiled water and repeat the
procedure.
Assembly
Your appliance has a cable tidy clip to enable
compact storage when traveling.
To extend the cable for use:-
Pull the cable release slider (located on the
bottom of the appliance). The cable tidy clip
(5) will now be released.
Lift the cable tidy clip (5) and un-wind the
cable from the appliance.
Replace the cable tidy clip to its original
position. A click will indicate that the cable
tidy clip is secured in its correct position.
Use
Warning! Always place the appliance on a flat,
clean and non-slip surface before operating it.
Warning! Always allow the product and
contents to cool before opening the lid / re-filling.
Warning! Always check the water level before
using the appliance. Never use the appliance
without sufficient water.
Warning! Steam may escape from the spout.
Disconnect the kettle from the power supply
before filling or adding water.
Close the lid (1) after adding or filling water,
otherwise the auto shut-off boiling function
will not work.
Do not fill with more than the max level of
water or there will be a risk of spillage.
Connect the kettle to power supply, press the
on power switch (2), the indicator light (4) will
come on to show the kettle is now
functioning.
When the water has boiled, the kettle will
switch off automatically and the indicator light
(4) will go out. The auto shut-off function also
works when the kettle is empty.
You can press the off power switch (3) to turn
off the kettle during operation.
Pouring boiling water
Make sure the appliance is switched off.
To avoid scalding, tilt the kettle slowly to pour
the boiled water.
After pouring, remove the plug from the
socket.
Cleaning and maintenance
Before cleaning and maintenance, remove the
plug from the socket and allow the appliance to
cool.
Warning! Before cleaning and maintenance,
switch the appliance off, remove the plug from
the socket and allow the appliance to cool.
Warning! Do not immerse the appliance, the
cord set or the plug in water or any other liquid.
Wipe the exterior with a damp cloth.
Do not use scouring pads.
5
ENGLISH