BLODGETT OVEN COMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401 Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
MODEL SHO-G
SHORT FORM SPECIFICATIONS
Provide Blodgett full-size convection oven model SHO-G, (single/double) compartment. Each compartment shall have (porcelainized/stainless) steel liner and shall accept five I8" x 26"
standard full-size bake pans. Stainless steel front, top and sides. Right door shall be stainless steel, left door shall be stainless steel with dual pane thermal glass. Door shall have sin-
gle tubular chrome handle and simultaneous operation. Unit shall be gas heated with electronic spark ignition and shall cook by means of a dual-flow system combining direct and indi-
rect heat. Air in baking chamber distributed by dual inlet blower wheel powered by a two-speed, 1/3 HP motor with thermal overload protection. Each chamber shall be fitted with five
chrome-plated removable racks. Control panel shall be recessed with Cook/Cool Down mode selector, solid state (manual/digital) infinite thermostat (200- 500°F), and 60-minute timer.
Provide options and accessories as indicated.
DIMENSIONS:
Floor space 38-1/4" (972mm) W x 36-7/8" (937mm) D
Product clearance
Oven Back 0" from combustible and non-combustible construction.
Oven Sides 2" from combustible and non-combustible construction.
Interior 29" (737mm) W x 20" (508mm) H x 24-1/4" (616mm) D
If oven is on casters add to all height dimensions:
Single 4-1/2" (114mm)
Double 2-1/4" (57mm)
GAS SUPPLY:
3/4" NPT
Manifold Pressure:
• Natural – 3.5" W.C • Propane – 10" W.C.
Inlet Pressure:
• Natural – 7.0" W.C. min. – 10.5" W.C. max.
• Propane – 11.0" W.C. min. – 13.0" W.C. max.
MAXIMUM INPUT:
Single 50,000 BTU/hr (14.6 Kw)
Double 100,000 BTU/hr (29.2 Kw)
POWER SUPPLY:
115 VAC, 1 phase, 6 amp, 60 Hz., 2-wire with ground,
1/3 H.P., 2 speed motor, 1140 and 1725 RPM
230, 220/240VAC, 1 phase, 3 amp, 50 Hz., 2-wire with ground,
1/3 H.P., 1 speed motor, 1425 RPM
6' (1.8m) electric cord set furnished on 115 VAC ovens only.
MINIMUM ENTRY CLEARANCE:
Uncrated 32-1/16" (814mm)
Crated 37-1/2" (953mm)
SHIPPING INFORMATION:
Approx. Weight:
Single 535 lbs. (243 kg)
Double 1070 lbs. (485 kg)
Crate sizes:
37-1/2" (952mm) x 43-1/2" (1105mm) x 51-3/4" (1315mm)
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
SINGLE
DRAFT DIVERTER
6” (152)
28-3/8”
(721)
3-1/4” (83)
25” (635)
0” (0)
35-1/2” (902)
51-3/4” (1315)
57-1/16” (1450)
DOUBLE
DRAFT HOOD
12-3/4” (324)
0” (0)
6-1/2” (165)
17” (432)
33-1/4” (845)
38-9/16” (979)
70-5/8” (1794)
16-1/4”
(413)
41-15/16”
(1065)
9-7/8”
(251)
TOP VIEW
2-1/2” (64)
3-1/4”
(83)
3”
(76)
6” (152) dia.
38-1/4” (972)
17-3/8”
(441)
36-7/8”
(937)
19-1/16”
(484)
7-3/16”
(183)
Dimensions are in inches (mm)
APPROVAL/STAMP
P/N 36946 Rev G (5/06))