Filter
Top Products
BLODGETT OVEN COMPANY
www.blodgett.com
1400 Toastmaster Drive, Elgin, IL USA 60120 • Phone: (847) 741-3300 • Fax: (847) 741-0015
VIB3870-1, VIB3870-2, VIB3870-3
DIMENSIONS:
Floor space 105.8" (2685mm) W x 68" (1727mm) D
AIRFLOW REQUIREMENTS:
Model Supply Exhaust
Duct Size (all models):12" x 12" (305mm x 305mm) 12" x 12" (305mm x 305mm)
VIB3870-1:
CFM: 1100 CFM 1500 CFM
Static Pressure: 0.02-0.03" W.C. (5-7 Pa) 1.5" W.C. (373 Pa)
VIB3870-2:
CFM: 1450 CFM 1850 CFM
Static Pressure: 0.09" W.C. (22 Pa) 1.4" W.C. (348 Pa)
VIB3870-3:
CFM: 1800 CFM 2200 CFM
Static Pressure: 0.12" W.C. (30 Pa) 1.8" W.C. (448 Pa)
MINIMUM ENTRY CLEARANCE:
Largest uncrated component
70" x 46.3" x 20" (1778mm x 1176mm x 508mm)
SHIPPING INFORMATION:
Weight:
VIB3870-1 380 lbs. (172 kg)
VIB3870-2 480 lbs. (218 kg)
VIB3870-3 580 lbs. (263kg)
Crate size:
VIB3870-1 Palletized size and number not yet finalized
VIB3870-2 Palletized size and number not yet finalized
VIB3870-3 Palletized size and number not yet finalized
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
APPROVAL/STAMP
P/N M10591 Rev A (7/01)
Provide Blodgett In-Vent® ventilation system, engineered for Blodgett model MT3870 conveyor oven. Exterior shall be stain-
less steel on front sides and ducts. Interior shall be of aluminized steel. Baffle grease filters shall be of galvanized steel or
aluminum construction. All exterior panels removable without the use of tools for access to mechanicals and cleaning. Integral
exhaust and make-up air plenums connected to stainless steel duct collars with quick disconnect assemblies. Ventilation sys-
tem shall comply with ANSI/NSF-2 and UL-710. Provide factory authorized assembly and installation at additional cost, per
ANSI/NFPA-96. Ductwork between extension duct collars and rooftop equipment, and rooftop equipment not included.
Universal specification, based on specification sheet for
specific system with specific oven model.
SYSTEM OVEN MODEL
VIB3870-1, VIB3870-2, VIB3870-3 MT3870
SHORT FORM SPECIFICATIONS