Blomberg IWD 1004 ET Freezer User Manual


 
EN
12
unscrewing its screws as shown in the
figure below. (See Figure B)
2. Loosen the three screws of the hinges
of the lower door, which you wish to
escalate, with the help of a screwdriver
as shown in the figure below. (Do not
remove completely)
(See Figure C)
• If the freezer compartment door is
lower than the fridge compartment door,
bring them to the same level by turning
the turning the elevation screw on the
freezer compartment side in the direction
of arrow using a M6 Allen wrench as
illustrated in Figure D.
• If the freezer compartment door is
(D)
higher than the fridge compartment
door, bring them to the same level
by turning the elevation screw on the
freezer compartment side in the reverse
direction of arrow using a M6 Allen
wrench as illustrated in Figure D.
After bringing the doors to the same level
by elevating the front part with the aid of
the elevation screws,ensure the doors of
the refrigerator shall close properly. If the
doors do not close properly, this might
adversely affect the efficiency of the
refrigerator.
Adjusting the gap between