Filter
Top Products
INSTALLATION (continued)
13
CAUTION:
BURN HAZARD
DO NOT OPERATE UNLESS
THE GREASE DRIP TRAY
IS INSTALLED.
Moisture will drip into the hot
cooking surface causing
splattering of hot liquids.
Serious injury can result from
contact with hot splatter.
GREASE DRIP TRAY INSTALLATION
1. Install the GREASE DRIP TRAY on the hanger brackets, directly
below the grease baffle.
ROLL WARMER DRAWER INSTALLATION
1. Be sure roller catches (inside warmer cavity) are in the open
position. Install drawer assemblies in drawer slides.
2. Place appropriate one drawer insert pan into each warmer drawer.
If used, place one Humitrol rack into each drawer pan.
Fig. 7 Roll Warmer Drawer Pan Installation
508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center
DRAWER
SLIDE
DRAWER
STOP
DRAWER
ROLLER
ROLLER
CATCH
HUMITROL
RACK
DRAWER
INSERT PAN
AIR VENT
CONTROL
DRAWER
CATCH
DRAWER
ASSEMBLY
(shown from back)