Filter
Top Products
INSTRUCTION FOR USE
3
– The appliance must never be switched on without the coffee shower (11) and
filter holder (6).
– Avoid contact with the steam that is generated during the brewing process.
Otherwise there is a risk of scalding.
– Scalding may occur if the lid is removed during the brewing cycles.
– Boiling water can cause burns.
– Ensure that the ON/OFF button (15) remains easily accessible at all times.
– CAUTION: To prevent damage to the appliance do not use alkaline cleaning
agents when cleaning use a soft cloth and a mild detergent.
– Never immerse the appliance in water. Remember that this is an electrical
appliance.
– Only clean the housing (1) with a damp cloth.
– Push the ON/OFF button (15) and pull the plug out of the socket in order to
switch the appliance off.
– Always apply pressure to the plug rather than the cable when unplugging
the appliance from the mains.
– Do not allow the power cable to hang over the edges of tables or worktops
or permit it to come into contact with hot surfaces.
– Unplug the plug from the socket if the coffee machine is not in use or prior
to cleaning it. Allow the appliance to cool prior to cleaning it before putting
on or taking off parts.
– Never put an electrical appliance into operation if the power cable or plug
is damaged, after malfunctions have occurred or if the appliance itself has
been damaged in any way. In such instances take the appliance to the near-
est authorized service center for inspection, repairs or adjustment.
– Never attempt to replace the power cable on the appliance. Special tools are
required for this purpose. Only have the appliance repaired or the power
cable exchanged by a service center approved by the manufacturer, in order
to ensure that the appliance remains safe.
– Do not immerse the cable, plug or appliance in water or other liquids because
this may cause a fire, electric shock or injuries.
– Ensure that the surface upon which the appliance is placed is dry prior to use.
– Always put the housing lid (5), filter holder (6) and coffee filter (7) on the
appliance during operation.
INSTALLATION
– Place the appliance on a stable, level surface that is neither hot nor in close
proximity to a source of heat. The surface must be dry. Keep the appliance
and the power cable out of the reach of children.
– When using the pour over coffee machine never place the housing (1) on a
metal tray or any other metal surface.
– Check that the type plate on the appliance indicates a voltage in keeping
with the mains voltage in your region. Only connect the appliance to a
professionally grounded socket with an output current of at least 6 A. (Use
a residual current circuit breaker [RCD]. If necessary ask an electrician for
advice). Whilst using the appliance it is ne-cessary that the socket remain
easily accessible in case of emergencies. The manufacturer shall not be liable