Filter
Top Products
6
BISTRO
POURING OUT WATER
– To remove the kettle from the base unit (7), hold it by its
handle. Ensure that the kettle body remains level while
lifting it from the base unit (7).
– Pour the water from the spout with the lid (1) closed
Note: Please take care when pouring out water as boiling
water can cause scalds.
SWITCHING THE KETTLE ON AGAIN
– You may switch the kettle on again as soon as the built-
in thermal safety cut-off switch has had sufficient time
to cool.
MAINTENANCE AND CARE
SCALE FILTER
Scale, or calcium, is a natural substance that forms when
hard water is boiled. The filter serves to retain the calcium
in the water kettle.
CLEANING AND REMOVAL OF THE FILTER
It is important to clean the filter regularly. The filter clips
into the body and can be removed by pulling it upwards
from the body. It can be cleaned by gentle brushing with a
soft brush under running water.
KETTLE CLEAN AND DECALE
Remove scale using either a proprietary de-scaling product
suitable for plastic kettles (following the instructions care-
fully), or citrid acid.
We recommend using citric acid as follows:
Boil 1 litre of water, then unplug the kettle and stand it
in an empty sink or bowl. Add 50gm of citric acid crystals
gradually, then leave the kettle to stand.
As soon as the effervescence subsides, empty the kettle and
rinse it thoroughly with cold water. Wipe the outside of the
kettle thoroughly with a damp cloth to remove all traces of
citric acid which may damage the finish.
Do not use a more concentrated solution. Ensure that the
electrical connections are completely dry before using the
kettle. Citric acid crystals are available at most chemists.
– Failure to de-scale may invalidate the guarantee.
– Never use chemicals, steel wool or abrasive agents to
clean the exterior of the kettle.
– Only clean the appliance using a damp cloth.
– Never immerse the item in water: remember this is an
electrical applicant.
– Any other servicing should be performed by an authorized
service representative.