16
Continuous Shredder
(MUZ 4 DS2)
WARNING
1. Blades on discs are sharp. Handle
carefully. Do not grip the discs by the
blades.
2. When operating continuous shredder,
keep hands clear of filling and
discharge tubes. Only work with pusher.
3. The continuous shredder must be
completely assembled before placing
on the power unit.
4. Always operate the continuous
shredder fully assembled and with
cover in place.
The MUM 4635 UC and the MUM 4420 UC
Bosch Compact Series Kitchen Machines
include the MUZ 4 DS2 continuous
shredder attachment. The continuous
shredder attachment consists of, figure 9:
Figure 9.
a. Cover closure/pusher
b. Cover
c. 3 slicer/shredder discs:
• reversible slicing disc
• reversible shredding disc
• grating disc
d. disc holder/slinger
e. Housing
Continuous shredder, intended use
The continuous shredder attachment has
been designed for slicing, shredding and/
or grating of vegetables, as well slicing/
shredding of soft cheeses and sausages
or meat and grating of vegetables and hard
cheese.
Use of Slicer/Shredder
Before beginning to use this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to Off position,
“O/Off,” and that you have removed the
motor drive cover.
1. Before using the continuous shredder
for the first time, it is recommended that
the cover closure/pusher, cover, discs,
disc holder/slinger and housing be
washed. All components of the
continuous shredder are dishwasher
safe. After washing, rinse well and
dry before using.
WARNING
The blades on the discs are very sharp.
Handle with care.
2. The continuous shredder is used in
mode 2, see table 1. To place the
continuous shredded on the power unit,
the arm must be rotated to the
horizontal position. Depress the release
button, see 4a, and move the arm as
necessary so that the arm is horizontal.
If you have not already done so, remove
the motor drive cover from the mid-
speed drive, as shown in figure 10.