Bosch Appliances MUM 6622 UC Blender User Manual


 
15
Figure 9.
2. To assemble or reassemble blade/base
assembly into the blender, insert the
blade/base assembly into the blender
jar and press down on the blade/base
assembly. Turn clockwise to the stop,
see figure 11. The blade/base assembly
is then back in place.
Figure 10.
3. If you have not already done so, move
the motor drive cover to the high-speed
drive. Place the blender on the high-
torque drive of the power unit and turn
the blender counterclockwise with a
slight downward pressure until the jar
is firmly seated, see figure 11.
The MUM 6622 UC Bosch Universal Series
Kitchen Machine includes the MUZ 6 MX2
blender accessory. The blender accessory
consists of, figure 8.
How to Use Blender
The blender has been designed for crushing
ice; mixing liquids; pureeing vegetables;
preparing special diet and infant foods;
pulverizing fruit, vegetables, nuts and dried
bread (for bread crumbs); and preparing
mayonnaise and sauces.
Before beginning to use this or any other
attachment, make sure that the power unit
is on a clean, smooth, suitable work
surface and switched to off position, “O/Off,”
and that you have removed the motor drive
cover.
1. Before using the blender for the first
time, it is recommended that the
blender jar cover, closure/funnel and
blade/base assembly be washed. All
components, except the blade/base
assembly, are dishwasher safe.
Remove the blade/base assembly from
the blender, see figure 9.
CAUTION
Blade/base assembly is very sharp.
Handle with care.
The blade/base assembly may be
easily removed by inverting the blender
and using the blender cover to fit over
the tabs on the blade/base assembly.
Turn it counterclockwise until it stops,
see figure 9a, and then lift up, figure 9b.
Wash the blade/base assembly under
running water. Do not place the blade/
base assembly in the dishwasher or
allow it to stand in water. This will tend
to wash out the lubricant. After
cleaning, rinse thoroughly and dry
before using.