Filter
Top Products
10
surface and switched to the Off position,
“O/Off,” and that you have, if necessary,
moved the motor drive cover to the drive
that will not be used.
1. Before using the mixing bowl and
dough hook for the first time, it
is recommended that the bowl,
cover, splash ring and dough hook be
washed. All components of the mixing
bowl and the dough hook are
dishwasher safe. Or they may be
washed in warm soapy water. After
washing, rinse well and dry before
using.
2. If you have not already done so, move
the motor drive cover to the high-speed
drive. Place the mixing bowl on the drive
of the power unit and turn the bowl
counterclockwise with a slight
downward pressure until bowl is firmly
seated, see figure 4a.
Figure 4.
CAUTION
Failure to make sure that the bowl is
properly seated on the drive coupling before
the power unit is turned On can result in
damage to the bowl and/or coupling.
3. Engage the dough hook on the
driveshaft of the mixing bowl by placing
it over the center column, as shown in
figure 4b. Once in place, check to make
sure dough hook has engaged the
driveshaft by turning the dough hook
Figure 3.
3a. Bowl with cover and splash ring
3b. Dough hook
3c. Twin beating whisks
How to Use Dough Hook
The dough hook and mixing bowl are
intended to be used to knead yeast doughs
and to mix cookie and pastry doughs, and
also when adding nuts, chocolate chips,
dried fruit, hard butter or shortening,
hardened brown sugar, etc. to batters.
Use of mixing bowl with dough hook
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work