Filter
Top Products
9
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Š.
Use limitations
This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture). If this is
not the case, the
› and Š symbols will flash on the selected
hotplate display; then it will automatically set the power level
Š.
In hotplate number 1, the Powerboost function can be activated
at any time.
To activate
1. Select the power level Š.
2. Press the + symbol. On the hotplate, the › indicator will
appear.
The function has been activated.
To deactivate
1. Select a hotplate.
2. Press the - symbol. The › symbol will disappear and the
hotplate will return to the
Š power level.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Time program function
This function allows the selected hotplate to be switched off
automatically after a preset time by inserting the cooking time.
How to program
The hob should be switched on.
1. Select the required hotplate and power level.
Then press the
r symbol until the ‹‹ indicator is displayed.
The indicator lights up on the selected hotplate.
2. Set the time using the + or - symbols.
+ = 30 minutes
- = 10 minutes
After a few seconds, the timer will start to count down.
Once the time has elapsed
The hotplate turns off, there is a warning sound and the
‹
indicator lights up. Press the
r symbol. The indicators go out
and the sound stops.
To cancel or change the time
Select the hotplate with the
μ symbol. Press the r symbol
and change the cooking time with the + or -, symbols or
set to
‹‹.
Note: Any cooking time can be programmed up to 99 minutes.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
™‚
Childproof lock
‹ Deactivated.*
‚ Activated.
*Factory settings