Filter
Top Products
8
Preparing and Loading the Dishware (continued)
Bottom Rack Accessories
Flip Tines
Flip Tines fold down to make loading the racks
easier in some
instances.
Grasp the tines
as shown in
Figure 12 and
fold the tines
downward.
Loading Extra Tall Items
If an item is too tall to be placed into the bottom
rack even with the top rack in the raised position,
Remove the empty top rack by pulling it out of the
dishwasher until it stops rolling.
Pull the front of the rack upward and outward until
the rollers are completely free of the roller guides.
Set the top rack aside.
Push the
roller guides
back into the
dishwasher.
Insert the
Extra Tall
Item
Sprinkler
into the top
rack spray
outlet and
turn the
sprinkler
clockwise
to lock it
into
position as
shown in
Figure 16.
NOTE
: Keep the vent on the tub’s right side clear
by placing tall items such as plastic cutting
boards and tall baking sheets on the bottom
rack's left side, center, or back.
Figure 16
Rack Attachment
(models SHE66C, SHX57C and SHV57C only)
The rack attachment has two additional cup
shelves upon which to place cups and large
kitchen utensils. The rack attachment is as-
sembled on the rear edge of the lower rack.
To assemble:
Slide the Rack Attachment in Figure 14, keeping
the longest tines on the inside of the top basket
wire (a) and on the outside of the lower basket
wire (b), see Figure 13. The
short tines will snap into
place, see Figure 15.
Figure 14
Figure 13
Rear
corner
view of
Rack
inset
a
b
Figure 15
Rack Attachment Use
To use the rack attachment, fold down the cup
shelves and place items to be washed, see
Figure 15.
Figure 12