Filter
Top Products
English
48
circle labelled A in Figure 44.
4. Gently pull the ring handle to ensure that
the Assembly is locked into place.
Check/Clean the Spray Arms
Occasionally check the spray arms to
ensure that the spray nozzles are clear and
unobstructed. If the nozzles require
cleaning, the spray arms are easy to remove
and reinstall.
To remove the lower spray arm:
1. Pull the empty lower rack out of the
dishwasher tub.
2. Grasp the lower spray arm, as shown in
Figure 48, and gently pull the lower spray
arm upward, as shown in Figure 49.
If the spray nozzles need cleaning, flush
them under running water.
To reinstall the lower spray arm:
1. Gently press the lower spray arm back
into its installed position.
To remove the upper spray arm:
1. Remove the empty upper rack from the
dishwasher. The procedure for removing the
upper rack is on page 18 of this manual.
2. Turn the rack upside-down. The upper
spray arm is held in position by a locking nut,
as shown in Figure 50A. Turn the locking nut
counter-clockwise 1/8 turn and remove it, as
shown in Figure 50B, to release the spray
arm.
3. Gently remove the spray arm, as shown
in Figure 51.
If the spray nozzles need cleaning, flush
them under running water.
To reinstall the upper spray arm:
1. Gently press the upper spray arm back
into its installed position.
2. Return the locking nut to its installed
position and turn it 1/8 turn clockwise.
3. Return the upper rack to the upper rack
roller guides.
Check/Clean the Stainless Steel
Inner Door and Tub
Clean the outer edges of the inside door
panel regularly to remove food particles that
collect there from normal loading. If spots
begin to appear on the stainless steel tub or
inner door, make sure the rinse agent
reservoir is full.
(Care and Cleaning Continued)
(Continued on Next Page)
Figure 48/Ilus. 48
Figure 49/Ilus. 49
Figure 50/Ilus. 50
Figure 51/Ilus. 51
AB
Care and Cleaning | Entretien et Nettoyage | Cuidado y Limpieza