Filter
Top Products
ENGLISH - 7
www.boschappliances.com
LOADING THE DISHWASHER
• Use the Rinse & Hold cycle if waiting an ex-
tended period of time before washing.
• Pre-soak and hand-scour pots and pans with
burned-on or blackened food.
Pre-Load Preparation
• Remove large particles of food from the
dishes before food has a chance to dry, but
rinsing is not necessary.
Food soils will actually enhance
the detergent’s performance.
• Load dishwasher so water can circulate freely
and reach every part of item.
• Do not allow delicate items to touch - they
could be damaged.
• Place items upside down - so water does not
collect inside of them.
• Place items so that nothing protrudes through
the bottom of the racks - this could block the
rotation of the spray arms.
General Loading Tips
• Do not place foreign objects, such as
toothpicks, paper products, plastic
bags, or packaging materials, into the
dishwasher!
Before loading the dish-
washer, review the materials
chart provided on Page 6.
AHAM DW-1 -12 Place Setting
Standard Bottom Rack
Figure 2
AHAM DW-1 -12 Place Setting
Standard Top Rack
Figure 3
Figure 5
Figure 4
The dishwasher racks in Figures 4 and 5 are those
that come with the Bosch Integra Ltd model (SHU
9950) only. Shown in these figures are the
recommended 12 place setting loading patterns to
obtain the optimal performance from your
dishwasher.
Integra Ltd Racks
AHAM DW-1 -10 Place Setting AHAM DW-1 -10 Place Setting
Integra Ltd Bottom Rack
Integra Ltd Top Rack