Braun MR 4050 CA Blender User Manual


 
6
English
Our products are engineered to meet the highest
standards of quality, functionality and design. We hope
you thoroughly enjoy your new Braun appliance.
Caution
Please read the use instructions carefully and
completely before using the appliance.
The blades are very sharp! To avoid injuries,
please handle blades with utmost care.
Always unplug the appliance when it is left
unattended and before assembling, disassembling,
cleaning and storing.
This appliance is not intended for use by children or
persons with reduced physical, sensory or mental
capabilities, unless they are given supervision by a
person responsible for their safety. In general, we
recommend that you keep the appliance out of reach
of children. Children should be supervised to ensure
that they do not play with the appliance.
Do not hold the motor part
! nor the whisk gear box
Á under running water, nor immerse them in water.
Braun electric appliances meet applicable safety
standards. Repairs or the replacement of the mains
cord must only be done by authorised service
personnel. Faulty, unqualifi ed repair work may cause
considerable hazards to the user.
Before plugging into a socket, check whether your
voltage corresponds to the voltage indicated on the
appliance.
The appliance is constructed to process normal
household quantities.
Neither the beaker
&, nor the chopper bowl (c) is
microwave-proof.
Description
! Motor part
On/off switch (speed 1)
# On/off switch (speed 2)
$ Blender shaft
% Measuring beaker
& Whisk gear box
Á Whisk
( Chopper («CA»)
How to operate your handblender
The handblender is perfectly suited for preparing dips,
sauces, soups, mayonnaise and baby food as well as for
mixing drinks and milk shakes.
1. Insert the motor part
! into the blender shaft $ until
it locks into place.
2. Position the handblender deep in the bowl, then
press switch
or #.
3. After use, turn the blender shaft to remove it from the
motor part.
You can operate the handblender in the measuring
beaker, or in any other container. When blending directly
in the saucepan while cooking, remove the pan from the
stove fi rst to protect your handblender from overheating.
How to operate your whisk
Use the whisk only for whipping cream, beating egg
whites and mixing sponges and ready-mix desserts.
1. Insert the whisk
Á into the whisk gear box &, then
insert the motor part
! into the gear box until it locks
into place.
2. Place the whisk deep in a bowl and only then, press
switch
(speed 1) to operate it.
3. After use, fi rst turn the whisk gear box to remove it
from the motor part. Then pull the whisk out of the
gear box.
For best results:
Do not use the beaker
%, but a wider bowl.
Only use switch
(speed 1) to operate the whisk.
Move the whisk clockwise holding it slightly inclined.
Only whip up to 400 ml chilled cream (min. 30 % fat
content, 4-8 °C).
Only whip up to 4 egg whites.
How to operate your chopper
attachment
(a) Chopper gear box
(b) Blade
(c) Chopper bowl
(d) Anti-slip base/lid
The chopper is perfectly suited for chopping meat,
cheese, onions, herbs, garlic, carrots, walnuts,
hazelnuts, almonds etc.
When chopping hard goods (e.g. hard cheese) use the
on/off switch
#.
N.B.: Do not chop extremely hard food, such as ice
cubes, nutmeg, coffee beans or grains.
Before chopping ...
pre-cut meat, cheese, onions, garlic, carrots (see
processing guide on page 3),
remove stems from herbs, shell nuts,
remove bones, tendons and gristle from meet.
1. Caution: Carefully remove the plastic cover from the
blade (b). The blade is very sharp! Always hold it by
the upper plastic part. Place the blade on the centre
pin of the chopper bowl (c). Press it down until it locks
into place.
Always place the chopper bowl on the anti-slip base
(d).
2. Place the food in the chopper bowl.
3. Put the gear box (a) on the chopper bowl.
4. Insert the motor part
! into the gear box (a) until it
locks into place.
5. Press switch
or # to operate the chopper. During
processing, hold the motor part with one hand and the
chopper bowl with the other.
6. After use, turn the motor part
! to remove it from the
gear box.
7. Then remove the gear box.
8. Carefully take out the blade.
9. Remove the processed food from the chopper bowl.
The anti-slip base also serves as a lid for the chopper
bowl.
99600779_MR4050CA_Korea.indd 699600779_MR4050CA_Korea.indd 6 19.07.2010 10:18:32 Uhr19.07.2010 10:18:32 Uhr