Filter
Top Products
Congratulations! As the owner of a new Bravetti Food Processor, you are about to
use a very versatile and powerful kitchen appliance that will quickly become an
indispensable item in your kitchen. Bravetti products are engineered to meet the
highest quality standards and are designed to offer the ultimate in ease of operation
and convenience.
IMPORTANT INFORMATION
Please read all the following instructions carefully.
IMPORTANT
For your protection, the Bravetti Food Processor has a been fitted with a safety
interlock switch. The unit cannot run unless the food processor lid is locked in place.
Never attempt to defeat the food processor lid interlock.
2
Re-settable Thermal Safety
Device
Your Food Processor has been
designed with a unique safety system
which prevents damage to the unit’s
motor and drive system, should you
inadvertently overload your appliance.
The safety system will automatically cut
the electric power to the appliance
when the device senses an overload or
excessive temperature in the motor or
drive system. Should this occur during
use and the appliance stops
functioning, follow the re-setting
procedure below:
1. Turn the “ON/OFF” speed control
to the “OFF” position
2. Unplug the unit from the wall
receptacle.
3. Remove and empty the processor
bowl. Ensure that no food is
jamming the cutting blades or
attachments.
4. Allow the appliance to cool down
for a minimum of 30 minutes.
5. Re-install the processor bowl and
re-plug appliance in the wall outlet.
6. Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the “ON/OFF”
speed control to the “OFF” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours. After
this time has passed, repeat the
restart procedure, steps 5 and 6
above.
Using the Storage Compartment
Your Bravetti QUAD BLADE Food
Processor comes with a storage
compartment. (Fig. 20)
Fig.20
1. Lift the lid of the storage compartment.
2. Place attachments inside as shown
above.
Spatula Storage
Slide the spatula into the slot provided
on the side of the processor body.
(Fig. 21)
Cord Storage
The power supply cord can be
stored by feeding it into the opening
at the back of the food processor
body. (Fig. 22)
Fig. 21
Fig. 22
CLEANING & MAINTENANCE
9