Filter
Top Products
IMPORTANT SAFEGUARDS
OPERATING INSTRUCTIONS
Read Instruction Manual Before Use
Cleaning Instructions Hints
1. When preparing milk shakes
note that the volume of a milk
shake will vary according to the
type of milk used.
2. It is important to follow
guidelines in the recipes to
avoid spillage from the
container.
3. Always remember that solids
such as ice cream or fruit will
increase the volume of the milk
shake.
4. The container must always be
filled at least to half the distance
to the “MAX” line or the liquid
will not reach the blade.
5. When mixing do not fill above
the maximum level (8 oz./1
cup/250 ml) or liquid will
overflow.
6. For best results, all liquid
ingredients should be as cold as
possible.
7. All syrups and powdered mixes
should be added just before
mixing to prevent them from
sinking to the bottom of the
container.
8. The Drink Maker does NOT
crush ice. For best results, use
crushed ice if the recipe calls for
ice.
When using electrical appliances, basic safety precautions should always be
followed, including the following:
Warning: Always remove the
plug from the wall outlet before
cleaning or storing the unit.
never immerse the unit, cord
or plug in water or any other
liquid.
9. Do not use outdoors.
10. Do not let cord hang over edge of
table or counter or touch hot
surfaces.
11. Container must be properly in place
before operating the appliance.
12. Never add ingredients to container
while the appliance is operating.
13. DO NOT USE THIS APPLIANCE
ON A STOVE.
14. Do not use appliance other than
for intended use.
15. Do not operate the drink mixer
without the container. Do not use
any container other than the one
that is supplied with the drink mixer.
16. Unplug drink mixer before cleaning
or when not in use.
1. Read all instructions before using
the appliance. It is suggested
that you keep these instructions
in a safe place for future
reference.
2. Your voltage must correspond to
the voltage printed on the bottom
of the appliance.
3. To protect against electrical
shock, do not immerse the motor
housing (base), cord, or plug in
water or other liquid.
4. Close supervision is necessary
when the appliance is used by or
near children.
5. Unplug appliance from outlet
when not in use, before putting
on or taking off parts and before
cleaning.
6. Avoid contact with moving parts.
Keep hands, hair, clothing, as
well as spatulas and other
utensils out of container to
prevent personal injury or
damage to the mixer.
7. Do not operate the appliance with
a damaged cord or plug, or after
the appliance malfunctions, has
been dropped or damaged in any
manner. Return the appliance to
EURO-PRO for examination,
repair, electrical or mechanical
adjustment.
8. The use of attachments not
recommended or sold by EURO-
PRO may cause fire, electric
shock or injury.
1. To clean the blade, fill the container
with one (1) cup of warm water.
Operate the drink maker on speed
“1” as previously described in
operating instructions. Unplug unit
from wall outlet. Dry mixing blades
and shaft with a soft dry cloth.
2. Wipe the motor housing with a damp
cloth. Make sure that the cloth is not
excessively wet and that no moisture
enters the vents on the motor
housing.
3. Wash the container in warm, soapy
water.
Do NOT
use abrasive cleaners of any
type to clean either the unit or the
container.
DO NOT IMMERSE THE APPLIANCE
IN WATER OR ANY OTHER LIQUID.
IMPORTANT NOTICE
This unit has a short power supply cord
to reduce the risk resulting from
becoming entangled in or tripping over a
long cord. An extension cord may be
used if you are careful in its use:
1. The electrical rating of the extension
cord should be at least as great as
the electrical rating of the appliance.
2. An extension cord with the power
cord must be arranged so that it will
not drape over the countertop or
tabletop where they can be pulled on
by children or tripped over
accidentally.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electrical shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
1
Rev. 10/03
4