Bravetti EP65 Fryer User Manual


 
Read all the sections of this booklet and follow all the instructions carefully.
1. Before Using for the First Time
Warning: Never plug in the control panel (#5) when it is not installed in the fryer body with
heating element (#13) in the oil container. Do not immerse the control panel, cord or
plug in water.
Warning: This unit should not be used to boil water.
Prior To First Use, Clean The Unit Thoroughly
Warning: Always let the fryer cool completely for 2 hours before taking it apart for cleaning.
Never carry or move the Deep Fryer with hot oil inside. Before cleaning, always make
sure the plug is not in the wall socket.
• All components with the exception of the electrical parts, can be washed in warm soapy water.
Dry thoroughly before use.
• Use basket handle (#15) to remove the frying basket (# 14). Always make sure the basket
handle is securely attached to the basket. To attach the handle to the frying basket, insert the
metal part of the handle inside the metal bracket on the frying basket. (Fig. 1)
• Lift the control panel with heating element (#5) out of its slots by pushing it up from the bottom
with one hand while holding the body (#1) of the deep fryer with your other hand.
• Remove the oil container (#3).
• Clean the oil container (#3) and the frying basket (#14) with hot water, dishwashing liquid and a
non-abrasive sponge.
Fig. 1
MAX
Warning: Never immerse the control panel (#5) in water or any other liquids.
Warning: All components must be completely dried before filling with oil or using. Special care
must be taken to ensure the washable oil filter (#17) in the lid is completely dry,
otherwise the filter will not function properly and may lead to steam being trapped
within the fryer during use.
Warning: Never exceed “MAX” line when filling the basket with food.
4