Filter
Top Products
OPERATING INSTRUCTIONS
• Make sure the deep fryer is unplugged
and the oil has cooled before cleaning
or storing the deep fryer.
• The oil does not need to be changed
after each use. In general, the oil will
be tainted rather quickly when frying
food containing a lot of protein (such
as poultry, meat or fish). When oil is
mainly used to fry potatoes and is
filtered after each use, it can be used 8
to 10 times. However, do not use the
same oil for longer than 6 months.
• To filter the oil first make sure the oil
has cooled and then empty the oil from
the oil container into another container
or bottle. (Fig. 8) Wash and dry the oil
container and basket. Refill the oil
container with the oil, pouring the oil
through a wire strainer or paper filter.
(Fig. 9)
Fig. 8 Fig. 9
Filtering & Changing The Oil
8
Detachable Power Cord
Warning: Always remove the plug from
the wall socket before cleaning. Allow the
deep fryer and the oil to cool completely
(approximately 2 hours) before cleaning.
Never immerse the control panel, cord or
plug in water or any other liquid.
• Follow the cleaning instructions on
page 4.
• Never immerse the control panel, cord
or plug in water or any other liquid.
• Do not place the control panel, cord or
plug in the dishwasher.
• Clean the control panel only with a
damp cloth.
• The oil container and frying baskets can
be washed in the top rack of
dishwasher.
• The deep fryer cover can also be
washed in the dishwasher after you
have removed the filter.
• The filter can be rinsed. Do not
place in
dishwasher.
• The body of the deep fryer can be
washed in warm soapy water. Do not
put the body of the deep fryer in the
dishwasher.
Cleaning Instructions
Your deep fryer has been specifically
designed with your safety in mind. Your
deep fryer has incorporated a unique
detachable power supply cord. This
power supply cord cord is designed to
“Break Away” from the fryer body in the
event that the supply cord is
inadvertently pulled. This is intended to
prevent the tipping of the appliance and
hazardous spillage of hot oil.
The female receptacle portion of the
power supply cord is permanently
attached to the rear of the the control
panel.
To connect the male power cord plug to
the female receptacle on the appliance,
orient the male plug so that it mates
with the female receptacle. The male
plug can only be inserted one way. If
the male plug will not go into the
receptacle on the appliance, rotate the
male plug 180°.
IMPORTANT: Should the male plug
become detached from the appliance
during use, it is important to:
1. Unplug the power cord from the wall
outlet. (Fig. 10)
2. Turn off the
appliance at the
control panel.
3. Re-attach the
power cord to
the appliance.
4. Re-connect to
electrical outlet.
5. Turn the appliance back on.
Fig. 10
How To Reset Deep Fryer
Reset Button
Fig. 11
If for some reason your deep fryer stops
heating, the reason might be that the
safety reset switch has disconnected. To
re-start the deep fryer, follow the
instruction below:
• Using the back end
of a pen, push the
re-set button that
is located on
the back of the
control panel. The
deep fryer will beep to
indicate that it has been re-set.
(Fig. 11)