Filter
Top Products
8
STEP 10
Attach each shelf bracket under the top shelf as shown using screws (FF).
STEP 11
Install the outer slide onto the shelf bracket by sliding TAB 1 into CUTOUT A and TAB 2 into CUTOUT B.
The pull out shelf should be installed opposite of the handle.
NOTE: Some bend in the bracket is ok as the slides and shelf will take care of that once
they are installed.
TAB 1
TAB 2
CUTOUT A
CUTOUT B
This tab determines
where the shelf will
slide out from.
Each cart bracket has
additional cutouts to allow
the shelf to pull out from
either side of the cart.
SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF
Make sure the bracket
cutouts face this way, if not
the bracket will be installed
upside down.
FF