Filter
Top Products
18 19
DO'S AND DON'TS
unplug the cord. Remove a portion of
the mixture from the blender jug before
continuing.
Do not place hot or boiling ingredients
•
into the Breville Die-Cast Hemisphere
Blender™; allow to cool before placing
into the blender jug.
Do not place the Breville Die-Cast
•
Hemisphere Blender™ near the edge
of a bench or table during operation.
Ensure that the surface is level, clean and
free of water, fl our and other substances.
Vibration during operation may cause the
appliance to move.
TROUBLESHOOTING
POSSIBLE PROBLEM EASY SOLUTION
Motor doesn’t start or
blade doesn’t rotate
Check that the blender jug and lid are securely
•
locked into position.
Check that the blade assembly is correctly •
attached to the base of the blender jug.
Check that the ‘Power’ button and selected
•
function or speed setting is illuminated.
Check that the power plug is securely inserted
•
into the power outlet and switched on
Food is unevenly
chopped
Either too much food is being blended at one time
•
or the pieces are too large.
Try cutting food into smaller pieces of even size
and processing a smaller amount per batch.
For best results, the food should be chopped into
pieces no larger than ¾ inch.
Food is chopped too
fi ne or is watery
The food is over processed. Try using the Auto
•
Pulse function or process for a shorter time.
Food sticks to blades
and jug
The mixture may be too thick. Try adding more
•
liquid to the mixture and/or use another function.
LEDs start to fl ash and
buttons do not respond
The motor is being overloaded. Unplug the
•
blender from the power outlet and wait 30
minutes or longer.