Filter
Top Products
6
7
Know your Breville BarAroma™ Coffee
and Spice Grinder
Operating your Breville BarAroma™ Coffee
and Spice Grinder
Touch activated start/
stop button
Timer selector dial
Easy lift off lid
with transparent window
Grind selector control
with suggested coffee
style settings
Conical burr grinder
Removable bean container
holds up to 250g of coffee beans
Tidy cord storage
Non-slip feet
Stylish stainless steel design
Removable ground
coffee container
BEFORE THE FIRST USE
Before first use, remove all promotional labels
and packing materials attached to your Breville
BarAroma™ Coffee and Spice Grinder.
OPERATING INSTRUCTIONS
Remove the Bean Container, Bean Container
Lid and Ground Coffee Container and wash
in warm soapy water with a soft cloth. Rinse
and dry thoroughly. Before each use, ensure
Grinder Bowl and Ground Coffee Container are
clean and empty.
Place Bean Container into Grinding Chamber
with ‘Align’ arrow symbol on the Bean
Container aligning with the ‘Align’ arrow
symbol on top left-hand side of the Grinder
Base. Turn the Bean Container clockwise to
lock into position.
Measure the desired quantity of whole
coffee beans or spices directly into the Bean
Container and cover with lid.
Plug the Grinder into a 230/240v power outlet
and switch power outlet on.
Rotate the Bean Container to select the
desired fineness of grind by aligning one of
the following selections to the white marker on
the front panel of the Grinding Base;
COARSE – Percolator
MEDIUM – Plunger
FINE – Filter
EXTRA FINE – Espresso
SUPER FINE – Turkish
Rotate the Timer Selector Dial (marked as
number of cups) to select the desired grinding
time.
1.
2.
3.
4.
5.
6.
Press the ‘START’ button on the front of the
Grinder Base to begin grinding. The Coffee
Grinder will begin grinding the coffee/spices
directly into the Ground Coffee Container
and will stop automatically when grinding is
complete. To stop grinding cycle at any time,
push the ‘START’ button again. If ‘START’
button is pressed again, grinder will start from
beginning of timed cycle.
When finished, switch off at the power outlet
and unplug grinder.
Clean Grinding Chamber with a soft dry cloth
and rewind the power cord into the cord
storage area under the Grinder base.
Remove the Bean Container, Bean Container
Lid and Ground Coffee Container and wash in
warm soapy water with a soft cloth. Rinse and
dry thoroughly. Replace into position in the
Coffee Grinder.
7.
8.
9.
10.