Filter
Top Products
Operating your Breville Juice Fountain
10
Step 1
Wash your selection of fruit and vegetables ready
for juicing.
Most fruit and vegetables such as small apples,
carrots and cucumbers will not need to be cut to
size as these will fit into the feed chute whole.
When juicing carrots place the tip of the carrot
into the feed chute last.
Note
Step 2
Ensure the Juice Fountain is correctly assembled.
Ensure the stainless steel filter is thoroughly
cleaned before each use (refer to care and cleaning)
(See page 13). Ensure you place the juice jug with
lid fitted (or glass) under spout before
commencing juicing.
Step 3
Plug the power cord into a 230/240V power outlet
and turn the power ‘ON’. Push the ‘ON/OFF’ button
to ‘ON’.
Step 4
With the motor running, place food into the feed
chute. Using the food pusher, gently guide food down
the feed chute. To extract the maximum amount of
juice, always push the food pusher down slowly.
Step 5
Juice will flow into the juice jug and the separated
pulp will accumulate in the integrated pulp container.
When the integrated pulp container is full of pulp,
it must be emptied before continuing to juice.
(Refer to disassembling instructions on Page 11).
Reassemble machine to continue juicing.
Note
NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO CLEAR THE FEED CHUTE.
ALWAYS USE THE FOOD PUSHER PROVIDED.