Breville BKE830 Hot Beverage Maker User Manual


 
17
CARE, CLEANING & STORAGE
CARE, CLEANING
& STORAGE
Always switch off at the power outlet and
unplug the appliance from the power outlet
before cleaning.
REMOVABLE FILTER
The kettle features a removable mesh filter
to remove scale deposits for cleaner water.
To clean the scale deposits from the filter,
remove the filter by opening the lid and
sliding the filter up and out of the kettle.
The filter can be cleaned by placing under
running hot water and rubbing with a
cleaning cloth or brush.
To replace the filter, simply slide the filter
down into the slot behind the spout of the
kettle and push back into position.
NOTE
The filter could become damaged with
time, so please check regularly and
replace if found damaged.
NOTE
The concealed element in the base of
the kettle is made from high quality
stainless steel. Any brown stains
appearing are the result of mineral
deposits and are not rust.
REMOVAL OF MINERAL DEPOSITS
Mineral deposits in tap water may cause the
kettle interior and water window to discolour
over time.
We recommend the use of a proprietary
de-scaler such as the Breville Kettle Cleaner
to remove scale build up and stains.
BREVILLE KETTLE CLEANER
Directions for use:
1. Add 125ml of Breville Kettle Cleaner
to 2 litres of water.
2. Fill kettle with mixture on a
protected surface.
3. Bring kettle to boil and let stand for
30 minutes.
4. Clean spout by using a cloth dampened
with Breville Kettle Cleaner, rub well.
Then wipe off.
5. Bring the kettle to boil for a second time,
then empty solution.
6. Fill kettle with fresh water and bring to
the boil, discard boiled water. Now your
kettle is ready to make your next cup of
tea or coffee.
NOTE
To purchase the Breville Kettle
Cleaner, contact Breville Customer
Service or visit www.breville.com.au.
Alternatively:
1. Fill the kettle until ²
/
³
full with 1 part
vinegar and 2 parts water. Boil and allow
to stand overnight.
2. Empty the solution from the kettle.
Fill the kettle with clean water, bring
to boil and discard the water.
3. Repeat step 2 and the kettle will be
ready for use.