Filter
Top Products
12 13
PAge heAder.....
NOTE
The toaster features a LIFT & LOOK
™
button. This automatically raises
the carriage without cancelling or
resetting the selected browning
setting. Use the LIFT & LOOK
™
button
to view browning progress during the
toasting and, if necessary, cancel the
process when the desired toast colour
is achieved.
A BIT MORE
™
SETTING
This feature can be selected after or during
the toasting cycle.
To use this feature during the toasting
cycle:
The A BIT MORE™ button surround will
illuminate in white when selected. The
toasting time will automatically increase
but will not illuminate more of the LED
toasting progress indicator. A BIT MORE™
function can be cancelled by pressing the
A BIT MORE™ button again and the
original toasting cycle will continue.
To use this feature after the toasting cycle
has completed:
1. The A BIT MORE™ button surround
will illuminate in white when selected.
The carriage will automatically lower
and begin the additional toasting time.
The LED toasting progress indicator
will automatically align with the lowest
browning setting then flash and count
down for the additional browning time.
2. The TOAST/CANCEL button surround
will also illuminate in red and the
LIFT & LOOK™ button surround will
illuminate in white allowing you to
check on the toasting progress and, if
necessary, cancel the cycle by pressing
the TOAST/CANCEL button when the
desired toast colour is achieved.
3. Approximately 10 seconds before
the end of the additional browning,
the LIFT & LOOK™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash, the LED
toasting progress indicator will cease
flashing and the A BIT MORE™ button
surround will cease illumination. The
LED toasting progress indicator will
re-illuminate to the previously selected
browning setting.
4. Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the toast. The
TOAST/CANCEL button surround
will re-illuminate in white for up to
30 seconds, ready for the next
toasting cycle.
NOTE
The A BIT MORE
™
button can be
used with the TOAST, CRUMPET/
FRUIT BREAD button and
FROZEN functions.
CRUMPET/FRUIT BREAD BUTTON
Use this feature to select between the
crumpet or fruit bread function to
automatically adjust the toasting time.
CRUMPET SETTING
The CRUMPET setting activates additional
heat to the centre heating elements to
toast crumpet tops and lightly toast the
crumpet bases.
To toast crumpets:
1. Place the crumpets into the toasting
slots with crumpet tops facing inwards
as per the crumpet markings on the top
cover plate above the centre elements of
the toaster.
OPERATING YOUR BREVILLE PRODUCT OPERATING YOUR BREVILLE PRODUCT
2. To select the CRUMPET setting,
press the CRUMPET/FRUIT BREAD
button once and the button will
illuminate white.
3. Select the desired browning setting by
adjusting the BROWNING CONTROL
slide on the front of the toaster.
4. Press the TOAST/CANCEL button
and the surround will illuminate in red.
The crumpets will automatically lower
into the toasting slots. The middle
and side heating elements will
automatically adjust.
5. The LIFT & LOOK™ button surround
will also illuminate in white allowing the
toasting progress to be checked and, if
necessary, cancel the cycle by pressing
the TOAST/CANCEL button when the
desired toast colour is achieved.
6. Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash and the LED
toasting progress indicator will cease
flashing. The LED toasting progress
indicator will re-illuminate to the
previously selected browning setting.
7. Once the toasting cycle has finished and
the carriage has risen and locked into
the raised position, the toast ready alert
will sound. Remove the crumpets. The
TOAST/CANCEL button surround will
re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The CRUMPET button surround
will remain illuminated and should be
pressed twice to cancel if a subsequent
toasting function other than crumpets
is required. The CRUMPET button
surround will cease to illuminate after
30 seconds or when the appliance is
switched off at the power point.
NOTE
Place the crumpets into the toasting
slots with crumpet tops facing
inwards as per the crumpet markings
on the top cover plate above the
middle elements of the toaster.
To toast bagels:
The CRUMPET/FRUIT BREAD button can
also be used to toast bagels.
1. Place the bagel centre into the toasting
slots with bagel facing inwards.
2. To toast the bagel, press the CRUMPET/
FRUIT BREAD button once and the
button will illuminate white.
3. Select the desired browning setting by
adjusting the browning control slide on
the front of the toaster. We suggest to
start on setting ‘1’.
4. Press the TOAST/CANCEL button
and the surround will illuminate in
red. The bagel will automatically
lower into the toasting slots. The
middle and side heating elements
will automatically adjust.
5. The LIFT & LOOK™ button surround
will also illuminate in white allowing the
toasting progress to be checked and, if
necessary, cancel the cycle by pressing
the TOAST/CANCEL button when the
desired toast colour is achieved.
6. Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash and the LED
toasting progress indicator will cease
flashing. The LED toasting progress
indicator will re-illuminate to the
previously selected browning setting.
7. Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast ready