Breville BTA830XL Oven User Manual


 
10 11
PAGE HEADER..... PAGE HEADER.....OPERATING OPERATING
Before fi rst use, remove any packaging
material or promotional labels attached to
your toaster.
1. Insert the power plug into a 110/120V
power outlet. The TOAST|CANCEL
button surround will illuminate white.
The LED toasting progress indicator
will illuminate from left to right, then
align to the selected browning setting
(indicated by the position of the
browning control slide). The toaster
will revert to stand-by mode after 30
seconds if a button is not pressed or the
browning control slide is not adjusted.
NOTE
When using the toaster for the fi rst
time, we suggest toasting on the
maximum setting without bread.
The toaster may emit a thin smoke
or distinct odor on initial use. This
is normal and not detrimental to the
performance of the toaster.
2. Place bread, bagels, English muffi ns etc
into each of the toasting slots. Ensure
items for toasting are not too large or
too thick to fi t in the toasting slots.
3. There are 12 browning settings ranging
from ‘1’ (lightest) to ‘5’ (darkest).
Select the desired browning setting by
adjusting the browning control slide on
the front of the toaster. The LED toasting
progress indicator will illuminate and
align to the selected browning setting
(as indicated by the position of the
browning control slide).
NOTE
When toasting bread for the fi rst
time, it is suggested to toast on
browning setting '3.5' (8 LED's
illuminated). Various types of bread
and personal preference may require
a different browning setting. For
example, raisin toast and white light-
textured breads may require a lighter
setting, while heavier textured rye
breads may require a darker setting.
4. To start the toasting process, press
the TOAST|CANCEL button which
will illuminate red. The carriage will
automatically lower into the toasting
slots which starts the toasting cycle. As
the carriage automatically locks into
position, the LIFT & LOOK™ button
surround will illuminate white (refer to
LIFT & LOOK™ button, page 13). The
LED toasting progress indicator (above
the selected browning setting) will fl ash
and start to gradually count down.
NOTE
Toasting can be stopped at any time by
pressing the TOAST|CANCEL button.
This will cancel the operation and
the carriage will move to the raised
position.
5. Once the toasting cycle has completed
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound (refer to TOAST READY
ALERT, page 13, to adjust the volume).
Remove the toast. The LED toasting
progress indicator will re-illuminate to
the previously selected browning setting.
The TOAST|CANCEL button surround
will illuminate for up to 30 seconds
before entering stand-by mode.
NOTE
To re-activate the toaster from
stand-by mode, press any button or
move the browning control slide.
The TOAST|CANCEL button and LED
toasting progress indicator will
re-illuminate.
WARNING
Do not leave the toaster unattended
when in use as toast may jam.
In the unlikely event that bread,
bagels, English muffi ns or toaster
pastries become jammed in the
toasting slots, all the buttons and the
LED toasting progress indicator will
ash and the elements will turn off.
Remove the power plug from the power
outlet and allow the toaster to cool
completely before carefully easing the
bread out of the slots. Take care not to
damage the heating elements. Do not
use metal utensils.
TOAST|CANCEL BUTTON
The TOAST|CANCEL button surround
will illuminate white for up to 30 seconds
when the appliance is turned on. The toaster
will enter stand-by mode after 30 seconds
if a button is not pressed or the browning
control slide is not adjusted.
Press the TOAST|CANCEL button
once to lower the carriage and start the
toasting process. The TOAST|CANCEL
button surround will then illuminate red.
Press the TOAST|CANCEL button
during operation to cancel the toasting
process or any other function. The
TOAST|CANCEL button illumination
will change from red to white and stay
illuminated for up to 30 seconds before
entering stand-by mode.
A BIT MORE™ BUTTON
If your toast comes up too light, one press of
this button adds a little extra toasting time.
This feature can be selected before, during
or after the toasting cycle and can be used
with the BAGEL and FROZEN functions.
To use this feature during the
toasting cycle:
Press the A BIT MORE™ button. The
button surround will illuminate white
when selected. The toasting time will
automatically increase but will not
illuminate more of the LED toasting
progress indicator. The A BIT MORE™
function can be cancelled by pressing the
A BIT MORE™ button again and the original
toasting cycle will continue.
To use this feature before or after the
toasting cycle:
Press the A BIT MORE™ button. The
button surround will illuminate white when
selected. The carriage will automatically
lower and begin the additional toasting
time. The LED toasting progress indicator
will automatically align with the lowest
browning setting then fl ash and count down
for the additional browning time.