Filter
Top Products
14 15
PAge heAder.....
OPERATING YOUR BREVILLE PRODUCT
alert will sound. Remove the bagel. The
TOAST/CANCEL button surround
will re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The CRUMPET/FRUIT BREAD
button surround will remain illuminated
and should be pressed twice to cancel
if a subsequent toasting function other
than bagel is required. The CRUMPET/
FRUIT BREAD button surround will
cease to illuminate after 30 seconds or
when the appliance is switched off at the
power point.
FRUIT BREAD SETTING
Fruit bread, due to its higher sugar content,
needs less toasting time compared to
regular white or wholemeal bread.
The FRUIT BREAD setting automatically
adjusts the toasting time for fruit bread.
To toast fruit bread:
1. Place the fruit bread into the toasting
slots.
2. To select the FRUIT BREAD setting,
press the CRUMPET/FRUIT BREAD
button twice and the button will
illuminate blue.
3. Select the desired setting by adjusting
the BROWNING CONTROL slide on
the front of the toaster.
The browning settings range from
‘1’ (lightest) to ‘5’ (darkest).
4. Press the TOAST/CANCEL button
and the surround will illuminate in red.
The fruit bread will automatically lower
into the toasting slots.
5. The LIFT & LOOK™ button surround
will also illuminate in white allowing the
toasting progress to be checked and, if
necessary, cancel the cycle by pressing
the TOAST/CANCEL button when the
desired toast colour is achieved.
6. Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination. As the toasting stops and
the carriage rises, the TOAST/CANCEL
button surround will flash and the LED
toasting progress indicator will cease
flashing. The LED toasting progress
indicator will re-illuminate to the
previously selected browning setting.
7. Once the toasting cycle has finished and
the carriage has risen and locked into
the raised position, the toast ready alert
will sound. Remove the fruit bread. The
TOAST/CANCEL button surround will
re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The CRUMPET/FRUIT BREAD
button surround will remain illuminated
in blue and should be pressed once to
cancel if a subsequent toasting function
other than fruit bread is required. The
CRUMPET/FRUIT BREAD button
surround will cease to illuminate after
30 seconds or when the appliance is
switched off at the power point.
FROZEN BUTTON
This feature activates additional toasting
time required to toast frozen bread.
To toast frozen bread:
1. Place the bread into the toasting slots.
2. Select the desired browning setting by
adjusting the BROWNING CONTROL
slide on the front of the toaster.
3. Press the TOAST/CANCEL button
and the surround will illuminate in red
then press the FROZEN button and the
surround will illuminate in white. The
bread will automatically lower into the
toasting slots. The toasting time will
automatically increase.
OPERATING YOUR BREVILLE PRODUCT
4. The LIFT & LOOK™ button surround
will illuminate in white allowing you
to check on the toasting progress
and, if necessary, cancel the cycle by
pressing TOAST/CANCEL button when
the desired toast colour is achieved.
Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination.
5. As the toasting stops and the carriage
rises, the TOAST/CANCEL button
surround will flash and the LED toasting
progress indicator will cease flashing.
The LED toasting progress indicator will
re-illuminate to the previously selected
browning setting.
6. Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the toast. The
TOAST/CANCEL button surround will
re-illuminate in white for up to
30 seconds, ready for the next toasting
cycle. The FROZEN button surround
will remain illuminated and should be
pressed once to cancel if a subsequent
toasting function other than frozen
bread is required. The FROZEN button
surround will cease to illuminate after
30 seconds or when the appliance is
switched off at the power point. The
FROZEN button works for frozen
crumpets as well.
LIFT & LOOK
™
BUTTON
This feature automatically raises and lowers
the carriage so you can check progress
without interrupting and/or cancelling the
toasting cycle.
To select this feature:
1. The LIFT & LOOK™ button surround
will illuminate in white during the
toasting cycle and when using the
A BIT MORE™ feature. You can press the
LIFT & LOOK™ button during toasting
cycle to view the toasting progress. If
selected, the LIFT & LOOK™ button
surround will flash. The LED toasting
progress indicator will cease to flash
indicating that the selected toasting
cycle time has not been interrupted.
When the LIFT & LOOK™ cycle has
finished, the toasting cycle will
re-commence, indicated by the
resumed flashing of LED toasting
progress indicator.
2. Approximately 10 seconds before the
end of the selected browning setting,
the LIFT & LOOK™ button will cease
illumination and cannot be activated
in this time.
TOAST READY ALERT
A toast ready alert will sound when the
toasting cycle has finished and the carriage
has risen and locked into the raised position.
The default setting for the Toast Ready Alert
is High, but can be adjusted to Low or Mute.
Adjusting the Sound Level of the Toast
Ready Alert
Press and hold down the LIFT & LOOK ™
button for 2 seconds until the
A BIT MORE™, CRUMPET/FRUIT BREAD,
& FROZEN button illuminate white.
Mute:
Press FROZEN button, the light will flash
three times.
Low:
Press CRUMPET button, the unit will beep
three times with low sound.
High:
Press A BIT MORE™, the unit will beep
three times with high sound.