Breville BTM800 Hot Beverage Maker User Manual


 
29
Ensure the Tea Maker is turned OFF by
pressing the TEA|Cancel button (when
brewing tea) or the HOT WATER|Cancel
button (when heating water) on the Power
Base. The Tea Maker is OFF when the
button surround illumination goes out.
Remove the power plug from the wall outlet.
NOTE:
Allow all parts of the Tea Maker
to cool completely before
disassembling and cleaning.
NOTE:
Only the Jug Lid, Tea Basket, Tea
Basket Lid and Tea Scoop are
dishwasher safe.
NEVER IMMERSE THE BASE
OF THE GLASS JUG, POWER
BASE, POWER CORD OR
POWER PLUG IN WATER OR
ALLOW MOISTURE TO COME IN
CONTACT WITH THESE PARTS.
Cleaning the Jug Lid and integrated
scale filter
1. Wash the Jug Lid in warm soapy
water with a soft sponge, rinse and
dry thoroughly. The integrated scale
filter can be cleaned by placing under
running hot water and rubbing with a
cleaning cloth or brush.
2. Alternatively, the Jug Lid is dishwasher
safe. Position the Jug Lid vertically so
the scale filter is facing upwards. This
will allow water to drain properly.
3. Let all surfaces dry thoroughly prior
to using.
Cleaning the Glass Jug
1. After each use, empty the Glass Jug. Do
not allow brewed tea to stand overnight.
2. Wipe the interior of the Glass Jug with
a soft damp sponge or rinse with warm
water. Tea deposits will enhance the
flavour of the brewed tea, so if only
using as a Tea Maker do not wash
with soapy water.
3. Wipe the exterior of the Glass Jug with
a soft damp cloth to clean.
NEVER IMMERSE OR WASH
EXTERIOR OF GLASS JUG
UNDER RUNNING WATER.
NOTE:
Do not use chemicals, steel wool, or
abrasive cleaners to clean the inside
or outside of the Glass Jug as these
may scratch the surface.
!
!