Filter
Top Products
Trouble shooting guide
17
Possible problem Easy solution
Machine will not work The safety locking arm may not be correctly engaged in
when switched ‘ON’ the vertical operating position with the locking arm located
into the two grooves on either side of the juicer cover
(see picture on page 9 step 4).
Motor appears to stall Wet pulp can build up under the cover if the juicing action
when juicing is too vigorous. Try slower juicing action by pushing the
food pusher down more slowly (refer page 9 step 4).
Clean the filter bowl surround, the stainless steel filter and
the juicer cover.
Excess pulp building Stop the juicing process. Remove the juicer cover, scrape off
up in the micro mesh pulp. Re-assemble and begin juicing again. Try alternating
filter basket (soft and hard) vegetable and fruit varieties.
Pulp too wet and Try a slower juicing action. Remove stainless steel reduced
reduced extracted juice mesh filter basket and thoroughly clean mesh walls with a
fine brush. Rinse the filter basket under hot water. If the fine mesh
holes are blocked, soak the basket in a solution of hot water with
10% lemon juice to unblock the holes or wash in the dishwasher.
This will remove excess fibre build up (from fruit or vegetables)
which could be inhibiting the juice flow.
Juice leaks between Try a slower juicing action by pushing the food pusher down
the rim of the Juicer more slowly (refer page 12 step 4).
and cover the filter
Bowl surround Try a slower juicing action by pushing the food
juice sprays out pusher down more slowly (refer page 12 step 4).
from spout
Care and cleaning
continued
• Discolouration of the plastic may occur with
strongly coloured fruit and vegetables. To help
prevent this, wash parts immediately after use.
• If discolouration does occur, the plastic parts can be
soaked in 10% lemon juice and water or they can
be cleaned with a non abrasive cleaner.
To minimize washing up place a freezer bag
(or plastic grocery bag) into the pulp container
to collect the pulp. When juicing is completed
simply place the bag containing the pulp into a
bin. (Refer page 19 for ideas on using the pulp).
That’s the idea
™
Breville 5 year motor guarantee
The Breville Juice Fountain is constructed with a
heavy duty 850 watt motor. So heavy duty in fact
that we have given the motor a 5-year guarantee
against faulty materials or manufacture. This warranty
is an extension of the 12-month replacement
guarantee and covers the motor only. The warranty
does not cover damage caused by accident, misuse,
or being used in a manner not stated in the
instruction book.
The 5-year Guarantee is additional to the conditions
and warranties mandatory implied by the laws and
regulations of the individual States and Territories of
Australia and the Trade Practices act, 1974.
Important
Breville agree to replace the Juice Fountain in the
event of the motor being faulty or developing a
defect or fault, within the next 4-years after the
12-month replacement guarantee. As the motor
needs to be inspected by qualified technicians do not
return the Juice Fountain to the retailer, take them
to your nearest Breville Service Centre (Service
Centres are listed on the back of the Guarantee Card).
The Breville Service Centre will verify the date of
the manufacture and check your receipt to validate
your claim.
12 Month replacement guarantee
The Breville Juice Fountain is totally covered for the
first 12-months against faulty material or manufacture
by the Breville 12-month Replacement Guarantee.
(See Guarantee Card enclosed)
16
BR6009 JE95 Booklet.qxp 15/7/04 8:44 AM Page 16