Filter
Top Products
LEAK TESTING:
To prevent fire or explosion hazard:
• DO NOT smoke or permit ignition sources in the area while conducting a leak test.
• Perform test OUTDOORS only in a well ventilated area.
• Never perform a leak test with a match or open flame.
• Never perform a leak test while the grill is in use or while grill is still hot.
WHEN TO PERFORM A LEAK TEST:
• After assembling your grill and before lighting for the first time, even if purchased fully assembled.
• Every time the LP gas cylinder is refilled or if any of the gas components are replaced.
• Any time your grill has been moved.
• At least once per year or if your grill has not been used for more than 60 days.
CHECKING FOR LEAKS:
1. Create a mixture of 50% water and 50% liquid dishwashing soap.
2. Open the lid.
3. Insure all burner knobs are set to the OFF position.
4. To turn on the fuel supply, turn the cylinder
valve knob one turn counterclockwise.
5. Apply the soap water mixture to the following:
Supply tank (cylinder) weld
Connection nut to tank valve.
Back side of connection nut to brass
nipple.
Brass nipple connection into regulator.
Regulator connections to gas supply hoses.
Hose connection to gas manifold.
The full length of gas supply hose
Tank valve to cylinder
8
WARNING
I
M
P
O
R
T
A
N
T
S
A
F
E
G
U
A
R
D
• DO
NO
T R
EM
OVE TH
IS T
AG
•
TURN GAS ON
AND OFF
USINGV
ALVE ON L.P.
GAS
TAN
K.
USE
THIS RED
CONT
ROL
VALVE FO
R
FLAME ADJU
STMENT
ONL
Y.
A
B
C
D
E
F
G
H
A
B
C
D
E
F
Watch For Bubbles
DANGER
G
H