Filter
Top Products
Page 4
MODELS QTR080L • QTRE080FLT •
QTR110L • QTRE110FLT
3
4
1
5
6
7
8
9
17
16
11
10
4
2
14
12
15
13
18
18
SERVICE PARTS
99043782C
Key No. Part No. Description
1 97016466 Housing
2 97016449 Duct Connector-4"
3 98010102 Wiring Plate
4 99170245 Screw, #8-18 X .375 (2 req’d)
5 97016933 Wire Panel/Harness Assembly
6 99020284 Blower Wheel
7 99080568 Motor (QTR080L)
99080561 Motor (QTRE080FLT)
99080582 Motor (QTR110L)
99080580 Motor (QTRE110FLT)
8 99100491 Isolator (4 req’d)
9 97016467 Motor Plate (QTR080L, QTR110L)
97016901 Motor Plate (QTRE080FLT, QTRE110FLT)
10 99250959 Washer #8 (4 req’d)
11 99260558 Nut, Hex Lock #8-32 (4 req’d)
* 97016621 Blower Assembly (QTR080L)
* 97016905 Blower Assembly (QTRE080FLT)
* 97016739 Blower Assembly (QTR110L)
* 97016906 Blower Assembly (QTRE110FLT)
(includes key nos. 6 thru 11)
12 97016546 Grille Assembly (QTR080L, QTR110L)
97016868 Grille Assembly (QTRE080FLT, QTRE110FLT)
(includes key nos. 13 & 14)
13 99140199 Grille Spring (2 req’d)
14 99111281 Lens
15 97016888 Bulb, 42W Fluorescent (QTRE080FLT, QTRE110FLT)
16 97016864 Ballast Assembly (QTRE080FLT, QTRE110FLT)
17 99260423 Nut, Hex #8-32 (2 req’d) (QTRE080FLT, QTRE110FLT)
18 99111293 Spacer (2 supplied)
TAB
Order service
parts by “Part No.”
- not by “Key No.”
9. Remove
light lens.
Carefully insert a
small flat-blade
screwdriver
betweeen grille
and lens. Pry
lens out.
8. Push grille
against
ceiling.
10. Install light bulbs.
Fluorescent bulb
supplied with “FLT”
models.
Purchase an incandes-
cent bulb for “L” models
- 100W Max.
Purchase a 4W
incandescent night light
bulb.
Insert bulbs into their
sockets. Replace lens.
Fluorescent bulb shown
SERVICE NOTE
To remove Blower Assembly:
Unplug motor (7).
Remove screw (4) from
motor plate (9) flange.
Find the single TAB on the
motor plate (located next to
the receptacle).
Push up near motor plate tab
while pushing out on side of
housing. Or insert a straight-
blade screwdriver into slot in
housing (next to tab) and
twist screwdriver.