Filter
Top Products
- 5 -
1. SELECT BLOWER OPTION AND INSTALLATION TYPE
1.2 DUCTED INSTALLATION
The Broan Elite E60000 Series range hood includes many configurations: hoods with single or double internal blowers
(included with the hood), or hoods using external blowers. For this last category, the Broan Elite E60000 Series must be
installed with in-line blower models HLB3, HLB6, HLB9 or HLB11, or exterior blower model 331H, 332H, 335 or 336 only.
Other blowers cannot be substituted. (Blowers sold separately).
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1, 2, 3, 4, 6, 10, 12 and
up of this manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. If using 7”, 8” or 10”
round ducts, use a transition (internal blowers only). Use 2” duct tape to seal duct joints.
ROOF CAP
7” or 8” ROUND
OR 3¼” x 10”
RECTANGULAR
ELBOW
24” TO 30” ABOVE
COOKING SURFACE
WALL CAP
HOOD
DECORATIVE FLUE
or SOFFIT
HH0088A
7” or 8” ROUND
OR 3¼” x 10” DUCT
12”
ONE INTERNAL BLOWER
TYPICAL DUCTWORK
10” ROUND DUCT
4½” x 18½”
TO 10”
ROUND
TRANSITION
(see page 3)
ROOF CAP
24” TO 30” ABOVE
COOKING SURFACE
WALL CAP
HOOD
DECORATIVE FLUE
or SOFFIT
HH0089A
12”
TWO INTERNAL BLOWERS
TYPICAL DUCTWORK
HH0090A
10” ROUND
DUCT
12 ”
EXTERIOR
BLOWER
HOOD
DECORATIVE FLUE
OR SOFFIT
24” TO 30” ABOVE
COOKING SURFACE
332KR
ROUGH-IN KIT
(see page 4)
10” ROUND
ELBOW
EXTERIOR BLOWER
MODEL 331H, 332H, 335 OR 336
EXTERIOR BLOWER TYPICAL DUCTWORK
HH0091A
24” TO 30”
ABOVE COOKING SURFACE
IN-LINE BLOWER
10” ROUND DUCT
(except HLB3, 8’’ ROUND DUCT)
ROOF CAP
WALL
CAP
HOOD
MODEL HLB3, HLB6, HLB9 OR HLB11
IN-LINE BLOWER TYPICAL DUCTWORK
1.1 NON-DUCTED INSTALLATION
For a non-ducted installation, a recirculation kit ANKE60 Series (sold separately) must be installed. For maximum effectiveness,
we recommend installing this kit with a single (internal) blower hood. The kit fits hood from 30-inch width up to 48-inch
width. See installation instructions included with the non-duct kit ANKE60 Series.