Broan GSEH3K Ventilation Hood User Manual


 
3.1 SEMI-ANNUAL MAINTENANCE (ESSENTIAL)
Your wall controller (ACCGSC1 or 40425) tells you when to perform this maintenance
when the Filter Maintenance light is flashing. Otherwise, maintenance should
be performed every 6 months to ensure your unit proper operation for years to
come. Follow these steps:
1. Turn switch knob to OFF to unlock the door.
2. Unlatch the door and open it. If required, the
door can be removed. To do so, remove the
stopper (A) located on the right side of the door
hinge. Then, hold the door and hit with your
palm its left side. Slide the door to the right to
disengage it from the unit. Clean the inner side
of the door with a clean damp cloth, then wipe
with a dry one.
3. Slide out the air diffuser (model GSVH1K), the heat recovery core (model
GSHH3K only), the energy recovery core (model GSEH3K only) and the
filter cartridge from the unit.
NOTES: 1. On model GSVH1K only, never grab the white shaft (item 2)
to pull out the air diffuser.
2. To remove the filter cartridge, pull on its tabs.
1) Air Diffuser 3) Heat recovery core
2) White shaft
4) Energy recovery core 5) Filter cartridge tabs
3. MAINTENANCE
WARNING
Risk of electrical shocks. Before performing any maintenance or
servicing, always disconnect the unit from its power source.
!
- 9 -
1
3
4
VD0107
VD0091
VD0112
5
VD0155
2
VD0170
A