Filter
Top Products
2.2 OPERATING ACCGSC1 CONTROLLER
2.2.1 ACCGSC1 CONTROLLER DESCRIPTION
2.2.2 USING ACCGSC1 CONTROLLER
• OFF: To stop the unit, slide the button on this position.
• LOW: For a day-to-day usage, slide the button on this position.
The unit then will operate on low speed, providing 70 cfm.
• H
IGH: For a high speed operation, slide the button on this position.
Generally used when more ventilation is required, such as parties,
smokers, or for a 6-bedroom house. This mode provides 105 cfm.
2. CONTROLS
VC0059
High
Low
OFF
Reset Filter
Filter Maintenance
Power
POWER INDICATOR:
LIGHTS UP WHEN SLIDE
SWITCH IS IN THE HIGH OR
LOW POSITION.
FILTER MAINTENANCE
INDICATOR:
FLASHES EVERY MINUTE TO
INDICATE IT IS ON DUTY.
FLASHES EVERY SECOND
WHEN IT IS TIME TO
REPLACE PREFILTER.
LED STAYS LIT WHEN IT IS
TIME TO REPLACE FILTER
AND PREFILTER
.
RESET FILTER HOLE:
ONCE THE MAINTENANCE DONE, RESET THE FILTER
MAINTENANCE INDICATOR BY CAREFULLY INSERTING A SMALL
ROD
(E.G.: PAPER CLIP) IN THE RESET FILTER HOLE,
FOR 1 SECOND. THE FILTER MAINTENANCE INDICATOR
WILL TURN OFF. REFER TO THE FILTER MAINTENANCE
RECOMMENDATIONS IN SECTION 3.
- 5 -
OFF:
UNIT IS OFF.
Low:
UNITISOPERATINGAT
ITS LOW SPEED.
HIGH:
UNITISOPERATINGAT
ITS HIGH SPEED.
2.1 MAIN SWITCH
All units are equipped with a 3-position main switch, located on the front panel. The
unit is intented for use with a wall controller (provided, see below). The main switch
is to remain in either the “OFF” or “Normal/Remote” modes ONLY. The “Normal/Remote”
mode allows the homeowner to operate the product from the wall controller (supplied
with the unit), typically mounted near a thermostat or other convenient location.
OFF:
UNIT IS OFF AND
DOOR IS
UNLOCKED.
NORMAL/REMOTE:
UNITISOPERATINGON
LOW SPEED
. THIS IS THE
CORRECT POSITION
WHEN THE WALL
CONTROLLER IS USED.
BOOST:
UNIT IS OPERATING
ON HIGH SPEED.
VC0053