Bunn FMD-5 Beverage Dispenser User Manual


 
ITEM PART NO. QTY. DESCRIPTION
21
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
FILL VALVE & DRAIN LINE
1 35094.0000 1 Valve Assy, Inlet 120V
35094.0005 1 Valve Assy, Inlet 230V
00938.0000 2 Fastener, U-Type #8
02322.0002 2 Screw, Truss Head #8-32 x .375" Blk
2 34768.0000 1 Fitting, 90° Elbow .375" MPT x .375" flare
3 34993.0000 1 Tube
4 12757.0000 1 Nut, Hex .625"-18 Brass
5 01514.0000 1 Lockwasher, Internal Tooth .625"
6 12756.0000 1 Fitting, Bulkhead Male .38" flare
7 00976.0000 1 Cap Nut .375" flare, Brass
8 33606.0001 1 Elbow .375" NPT x .50" Barb
9 35134.0000 3 Clamp, Hose, Wormdrive .312" to .50"
10 20976.0005* 1 Tube, Silicone .38" I.D. x 7.5" (Order item 20)
11 20976.0069* 1 Tube, Silicone .38" I.D. x 24.0" (Order item 20)
12 12422.0001 1 Clamp, Hose .59/.66" I.D.
13 34392.0000 1 Plug
14 11630.0001 1 Clamp, Tubing Shut Off
15 32359.0000 1 Gasket, Copper
16 20976.0043* 1 Tube, Silicone .38" I.D. x 10.75" (Order item 20)
17 12422.0001 1 Clamp, Hose .59/.66" I.D
18 36233.0000 1 Valve, Water Inlet 120V
36233.0001 1 Valve, Water Inlet 230V
32283.0000 2 Screw, Pan Head M4 x 6MM
19 37297.0006 1 Elbow .25" Flare x .75" FTHRD
20 20976.1000 - Tube, Silicone .38" I.D. x 12.0" (Cut to Required Length)
20976.1001 - Tube, Silicone .38" I.D. x 30.0" (Cut to Required Length)
21 43644 - Kit, Valve Rebuild (Not Illustrated)
35170 051111
See item 21