Filter
Top Products
8
A. Enter program mode and advance to next menu
B. Incriment display value positive
C. Exit program mode
D. Incriment display value negative
E. Return to previous menu and interrupt dispense
PORTION CONTROL MODELS
Digital Beverage Control Digital Beverage Control
STOP
PROGRAM HOME SCREEN
The screen above will be shown when the dispenser is ready for use. While the tank is heating, the water
temperature will be displayed until the ready temperature is reached.
PROGRAMMING THE DISPENSER
The following function screens are in order of appearance. Each screen will have instructions on how to
access, and the procedures to program the various functions of the dispenser. To enable programming, place
the “NORMAL/PROGRAM/RINSE” switch in the “PROGRAM” position.
IMPORTANT PROGRAMMING NOTES - READ CAREFULLY
To exit the programming mode at any time, press and release the exit (center) pad located on the front
switch panel. The display will return to the PROGRAM HOME SCREEN.
If none of the fi ve programming switches are pressed within 90 seconds during the setup of the dispenser,
the programming of the function screen that is being set will be exited and the display will return to the PRO-
GRAM HOME SCREEN.
DISPENSE READY
BUNN iMIX
ABCDE
P3059
P3057
A. Enter program mode and advance to next menu
B. Incriment display value positive
C. Exit program mode
D. Incriment display value negative
E. Return to previous menu
SELF SERVE MODELS
Using the menu-driven display (MAIN SCREEN) on the front of dispenser, the operator has the ability to
alter or modify various functions of the dispenser. This allows for precise dispensing of various fl avors of
powdered products.
Programming of dispenser is achieved by entering a certain function, then, by use of programming switch-
es, the operator can customize the dispensing process to their specifi cations.
To access the programming mode, and to scroll through different function screens, the programming
switches shown are used. There are fi ve of switches that will be used for setup of the dispenser.
PROGRAMMING SWITCHES
ABCDE
37510 111004