Filter
Top Products
12
PROGRAMMING THE DISPENSER
Open the dispenser door to access the digital programming module with LED display.
Two basic modes are available to the operator: Display Mode and Program Mode.
To enter the Display Mode, Set the RUN/NIGHT/PROGRAM Switch to the RUN position.
To enter the Program Mode, Set the RUN/NIGHT/PROGRAM Switch to the PROGRAM position.
Display Mode: Used to view the current set-up values. Use the MENU switch to scroll to the next display.
NOTE: The display blanks out after two minutes of inactivity. Press any button to activate the display.
LCD DISPLAY DISPLAY MODE DESCRIPTION
Home View Alternates between Tank Temperature
and Cold Shoe Temperature.
MENU (-) (+)
Tank Temperature Displays target Tank Temperature
(F°)
MENU (-) (+)
Regular Dispense Ratio Displays Left Dispense Ratio (XXX:1)
MENU (-) (+)
Decaf Dispense Ratio Displays Right Dispense Ratio
(XXX:1)
MENU (-) (+)
Cup Dispense Volume Displays Cup Dispense Volume (XX.X
Oz.). Set to 0.0 for “Push and Hold”
Dispense Mode.
MENU (-) (+)
Carafe Dispense Volume Displays Carafe Dispense Volume (XX.
X Oz.)
MENU (-) (+)
38217 052305
1 8 0
10
1 8 0
20
3 8
30
3 8
40
0 0
50
0 0