Bunn NHB Coffeemaker User Manual


 
4
Read all instructions.
Do not touch hot surfaces. Use
handles or knobs.
Do not place cord, plugs, or
brewer in water or liquid.
Close supervision is necessary
when the brewer is used by or
near children.
Unplug from outlet when not in
use for extended periods of time
and before cleaning. Allow to
cool before putting on or taking
off parts, and before cleaning.
Do not operate the brewer with
a damaged cord or plug or if the
brewer malfunctions or is
damaged in any manner. Return
the brewer to an Authorized
Service Facility for
examination, adjustment, or
repair. (Refer to page 11.)
The use of an accessory not evalu-
ated for use with this brewer
may cause injuries.
For household use only. Do not
use outdoors.
Do not let cord hang over edge
of table or counter or touch hot
surfaces.
Do not place the brewer on or
near a hot gas or electric burner
or in a heated oven.
Do not use brewer for other than
its intended use.
Do not place or remove funnel,
or decanter while brewing.
The decanter must not be used
on a range top or in a microwave.
Do not set a hot decanter on a
cold surface.
Do not use a cracked decanter
or a decanter having a loose or
weakened handle.
Do not clean decanter with
cleansers, steel wool pads, or
other abrasive materials.
When the brewer is idle, the lid
should be in the closed position.
IMPORTANT SAFEGUARDS
Follow these basic safety precautions when using electrical appliances
to reduce the risk of fire, electric shock, and/or personal injury:
SAVE THESE INSTRUCTIONS
A short power-supply cord is used to reduce the risks resulting from
becoming entangled in or tripping over a longer cord.
If an extension cord is used, the marked electrical rating of the
extension cord should be at least as great as the electrical rating of
the brewer. The cord should be arranged so that it will not hang
over edge of table or counter where it can be pulled on by children
or tripped over.
The extension cord must be of the 3-pronged, 3-socketed, grounding
type, 3-wire cord. (Including grounding conductor).