Filter
Top Products
Page 5
OPERATING CONTROLS
Model CDBC TWIN
ON/OFF SWITCH
Pressing the "ON/OFF" switch (indicator glowing) supplies power to the brew station warmer, enables the brew
circuit, and energizes the tank refill circuit. Pressing the switch again (indicator not glowing) stops tank refilling,
brewing and deenergizes the brew station warmer. Stopping a brew cycle after it has been started will not stop the
flow of water into the decanter/server until the funnel is empty.
NOTE – Hot water will be available at the faucet in a limited amount when the "ON/OFF" indicator is not glowing
because the tank will not refill.
BREW SWITCH
Momentarily pressing and releasing the switch starts a brew cycle when the "ON/OFF" indicator is glowing.
NOTE – The "ON/OFF" indicator must be glowing to initiate and complete a brew cycle.
ADDITIONAL WARMER SWITCHES
Pressing any additional warmer switch so the indicator is glowing, supplies power to the associated warmer.
READY INDICATOR
This indicator glows when the preset temperature has been achieved. The word "NOT" above "READY" will glow
in all other instances.
P1869
36672 030104