Butler 645-067 Coffeemaker User Manual


 
DESCALING
The lime content of ordinary tap water
means limescale may be deposited inside
the coffee maker. This limescale may be
loosened using acetic acid (NOT ordinary
vinegar) or descaler, available in
supermarkets, etc.
1. Mix 100 ml acetic acid with 300 ml cold
water, or follow the instructions on the
descaler packaging.
2. Pour the solution into the water reservoir
and switch the coffee maker on using the
I/O button.
3. Allow half of the solution to run through
the coffee maker, and then switch it off
for approximately 10 minutes.
4. When the 10 minutes are up, switch the
coffee maker on again and allow the
remainder of the solution to run through
it.
5. To remove the final residues of limescale
and acetic acid, pour a potful of cold
water into the water reservoir, switch the
coffee maker on and pass the water
through it.
6. Pass fresh water through the machine 3
times (as described in point 5).
7. The coffee maker is now ready for use
again.
ENVIRONMENTAL TIPS
Once any electronic product is no longer
functional, it should be disposed of in such
a way as to cause minimum environmental
impact, in accordance with the regulations
of your local authority. In most cases you
can take such products to your local
recycling station.
GUARANTEE TERMS
The guarantee does not apply:
if the above instructions are not followed
if the appliance has been interfered with
if the appliance has been mishandled,
subjected to rough treatment, or has
suffered any other form of damage
if faults have arisen as a result of faults in
your electricity supply.
Due to the constant development of our
products in terms of function and design,
we reserve the right to make changes to the
product without prior warning.
IMPORTER
Adexi Group
16
IM 16/03/05 14:19 Side 16