Filter
Top Products
Before the First Use
To reduce risk of fire or electric shock, do not immerse cord, plug
or appliance in water or any other liquid.
1. Before preparing coffee in your new coffee maker, thoroughly clean the
removable water reservoir, carafe, carafe lid and removable filter holder in
warm, soapy water. Rinse and dry thoroughly. Replace clean disassembled
parts. NOTE: Do not dry the inside of the removable water
reservoir with a cloth because this will leave a residue of lint
and may clog the coffee maker.
2. Replace the removable filter holder into the coffee maker. The pause and
serve flow valve, located on the bottom of the filter holder, sits down into
the cavity. Press the filter holder down into place. The filter holder lid will
be fully closed when properly assembled.
3. Clean the inside of the coffee maker by brewing 2 full carafes of clean,
cool water. (See To Brew Coffee Immediately on page 10.) Do
not place any filter or coffee in the removable filter holder for
this initial cleaning.
NOTE: At the end of the first brewing cycle, press the START/
CANCEL button to turn the coffee maker OFF and wait 10
minutes for the appliance to cool. Empty carafe and replace
onto base plate/warming plate. Add fresh cool water to the
water reservoir. Press the START/CANCEL button to turn the
coffee maker ON. BREW will appear on the digital display
as the coffee maker begins to heat; brew a second carafe.
Discard water.
4.
Assemble the charcoal filter. Open the filter cage on the bottom of the
handle and insert the charcoal filter. Seat the charcoal filter assembly over
the water valve on the base of the water reservoir.
5.
Your coffee maker is now ready for use.
9