Cannon 10266G Electric Pressure Cooker User Manual


 
INSTALLATION AND OPERATIONAL CHECKS
After installation, check for gas soundness. The supply pressure can be checked at the
grill injector. Access to the injector is by first removing the baffle at the front of the grill
fastened by two screws. Then remove the fastening screw on the right hand side of the
burner and slide the burner off the injector. Ensure that the grill burner is correctly
located under the fixing screw on reassembly.
Fit the battery. Fit the hotplate burner bodies, enamelled discs and pan supports.
Referring to the instructions for use where necessary,
1. Check that the hotplate and grill burners ignite correctly and burn with a
steady flame. Check for a steady flame on the low setting.
2. Check that with the oven set to mark 9, the burner ignites at low rate, and
then increases to full rate within 60 seconds. Leave the oven full on with
the door closed for 10 minutes, and check that when the control is turned to
the ‘E’ setting that the flame reduces.
3. Check the operation of the minute timer.
Instruct the user on the operation of the cooker.
23
INSTALLATION INSTRUCTIONS