Cannon 10526G Electric Pressure Cooker User Manual


 
16
CARE AND CLEANING
COOKER FINISH CLEANING METHOD
Vitreous Enamel
Hotplate, burner caps,
fascia, roasting dish, grill
pan, oven base and rear,
inside of oven door,
splashback, grill front panel,
grill top panel
Cloth wrung out in warm soapy water. Stubborn
stains can be removed with a cream paste,
liquid cleaner or by rubbing with fine steel wool
soap pads.
Check that the cleaning agent is approved by the
Vitreous Enamel Association.
Paint
Side trims, plinth, fascia
bottom trim, side panels,
storage drawer, grill surround,
door handle
Wash with a cloth wrung out in warm soapy
water only.
DO NOT USE ABRASIVES.
Aluminium
Hotplate burner bodies
Similar to paint cleaning above. Use a nylon brush to
remove any cleaning materials, water or dirt from the
hotplate burner rings.
Glass
Oven door fronts
As for enamel cleaning. Polish with a clean dry cloth
or kitchen roll.
Chromium Plating
Oven shelves, grill pan grid,
grill pan handle support, grill
pan carrier
Wipe with a cloth wrung out in warm soapy water.
A fine steel wool soap pad e.g. Brillo, Ajax, or a
chrome or stainless steel cleaner may be used.
Plastic
Grill pan handles,
control knobs
Wipe with a cloth wrung out in warm soapy water.
Stubborn stains can be removed with a cream
cleaner.
Note: To ensure rapid lighting of the hotplate burners every time they are used, the
ignitors must be kept clean and dry. Remove any food spillage or cleaning materials
from the electrode using a small nylon brush such as a toothbrush.